SD-Link TY96/97-DS
SD-Link TY96/97-DS – Image 2
SD-Link TY96/97-DS – Image 3
SD-Link TRIG TY96 Adapter
SD-Link TRIG TY96 Adapter
SD-Link TQAvionics

SD-Link TY96/97-DS

139,00 €

including 19% VAT plus shipping and handling

Bluetooth adapter (BLE, Dual Source) for TRIG TY96/TY97 VHF radios — transmits frequencies SkyDemon and Sky-Map, even with existing EFIS. Screw & Play, 12–24 V. For experimental use only.

Delivery time: Standard shipping (1–5 business days)

Plug & Play5-28 VBLE 5.024 months
Item number: SD-TY96/97-DS Categories: , Keywords , , , , , , , , , , , , , Brand:

Description

TRIG TY96/TY97 Bluetooth adapter (Dual Source) for SkyDemon, Sky-Map and other navigation apps — SD-TY96/97-DS.

The SD-TY96/97-DS is a compact Bluetooth adapter that connects to existing devices without additional cabling. TRIG-Sub-D connector and the mounting tray of the TRIG TY96/TY97 VHF transceivers are installed. Afterwards, you transmit standby and active frequencies directly from the app via Bluetooth Low Energy (BLE). The adapter also works if an EFIS (Dynon, G3X ua) is connected — Dual Source.

Screw & Play instead of Plug & Play. This adapter is attached to the mounting tray with two screws; the existing connector's two screws are replaced with the mounting clips. You don't need to solder anything or modify the existing wiring. SkyDemon You select "Garmin GTR225 Compatible" as the radio device type.

Key Features

  • Compatibility: developed for TRIG TY96 and TY97. An existing EFIS (Dynon, G3X ua) can still be used.
  • Simple installation: The adapter is used between the existing TRIG-The plug and the radio are screwed together; screws and clamps are included.
  • Power supply: No additional power supply required; handles on-board voltages up to 28 V. An integrated fuse provides additional protection.
  • Requirements: Works on the 12V bus (TY96) and 24V bus (TY96/TY97).
  • Compact design: Dimensions 36 × 56 × 17 mm, Weight 60 gr.

Important note: This product is intended for experimental purposes only.

Step-by-step instructions as a PDF — in your language, for every supported navigation app. Also included with your delivery.

All instructions & datasheets

Additional Information

Weight 0,05 kg
Size 4,8x4,5x1,7 cm
Input configuration

Standard configuration (single-source BLE), dual-source (optional second external RS232 source / EFIS possible)
Compatibility

TQ TY96, TQ TY97
Operating system

Android, iOS
installation type

Plug-and-Play
Integrated fuse

Ja
Reverse polarity protection

Ja
Certification

Experimental
Plug-in system

Conec SlideLock
Initial configuration

Multidrop (supplying additional devices with received RS232 data)
Power Supply

12 V power supply, 24 V power supply

Product safety

Our adapters are experimental prototypes intended solely for use under test conditions. Installation and operation are the sole responsibility of the user; no type approval has been granted.

Before installation, please check compatibility with your radio and the permissible vehicle voltage. If you are unsure, contact us before installation.

Manufacturer / Distributor:
LayCom Vision GmbH – SD-Link
Chausseestr. 46, D-15518 Rauen, Germany
Tel. +49 3361 710253 · info@sdlink.de

Reviews

There are no reviews yet.

Write the first review for “SD-Link TY96/97-DS“

Your e-mail address will not be published. Required fields are marked with * marked

Adapter finder

Which variant suits your setup?

For TRIG There are several variants of the TY9X. The finder guides you to the right one in three steps – depending on whether an EFIS is installed.

Launch Finder

Installed by pilots

TRIG TY9X in the cockpit

Pictures and videos from the community — this is how the adapter fits in other users' cases TRIG TY9X setups.

View all built-in features

Show your own installation

Send us photos or a short video of your TRIG TY9X installation — we are adding to the gallery.

Genuine built-in features from the SD-Link-Community — filtered by product type and radio device.

Further SD-Link-Adapter