Category: Uncategorized

We are pleased to announce another gap in the SD-Link-portfolio closed:

With the SD-TY96/97-DS There is now finally a suitable Bluetooth adapter for TRIG TY96 / TY97 radios are available to support you.

But it's not quite as easy as it used to be. Previously, it was just a matter of "plugging" – now it's "screwing and plugging." Are you ready?

Properties at a glance

• Compatible with TRIG™ TY96 and TY97
• Easy installation with screw-and-play – adapter is screwed into the existing wiring
• No separate power supply required, no soldering, no crimping – suitable for 12 V and 24 V avionics systems
• Compact design: 36 x 56 x 17 mm, weight 50 g
• Integrated self-resetting fuse to protect the electronics
• Parallel use with existing EFIS connection possible

A detailed Installation Guide is included and is also available online.

For experimental use only!

Not every radio allows a PnP adapter – that’s why we have responded to your requests.

Many of you also wanted to use our adapters with Mounting trays (GARMIN/TQ) or Binder bushings (f.u.n.k.e) use – but the plug-and-play adapters don't fit here.
This is due to design reasons, as an adapter simply does not fit between a socket permanently installed in the mounting tray and the plug of the radio.

The solution: PigTails – tailored to individual wiring requirements to to easily solve complex installation situations.

Available now:

Proven in the avionics workshop. Our PigTails offer the flexibility needed for custom installations – and bring our adapters to places where they previously didn't fit.

We listened to you: Our new adapters are here!

We call it Dual source.

Many pilots have asked us: "Can I SkyDemon "Use it even though my EFIS is already connected to the radio?" – From now on the answer is: Yes, you can!

Our new Dual Source Adapter enable exactly that:

➡️ SkyDemon / Sky-Map / VFRnav / XCsoar – integration via Bluetooth®

➡️ continue to use the existing EFIS connection

Regardless of whether Garmin G3X, Dynon Skyview, Nesis or other systems – through the Dual-source principle The existing data line is split by the adapter, and the data from the second source is mixed in. No reprogramming or configuration required.

Based on customer feedback developed, tested and improved – for maximum flexibility in the cockpit.

💬 "Finally I can use my EFI AND SkyDemon "Use it without compromise – a great solution!" – Feedback from a beta tester

Bluetooth adapter for Becker AR6201 / AR6202 now with integrated power supply

We are pleased to present the latest version of our proven SD-Link Adapters for Becker Introducing AR620X radios: The new SD-AR620X-E-NG adapter with integrated power supply is here!

The compact Bluetooth Low Energy (BLE) adapter allows frequencies to be used directly from SkyDemon to your Becker Transferring data from AR6201, AR6202, or AR6203 radios – now completely without an additional power supply. Simply plug the adapter into the free port. J1 of the radio – done. Thanks to the Conec SlideLock system, the adapter sits securely and reliably on the device.

No additional wiring. No connection to the vehicle's electrical system. Full SkyDemon-Integration.

The new SD-AR620X-E-NG adapter is powered entirely via the data interface—a true milestone in ease of installation. Ideal for those who prefer simplicity without sacrificing full functionality.

Properties at a glance:

• Compatible with Becker AR6201, AR6202 and AR6203
• Plug-and-play installation on port J1 – without any mechanical changes
• Integrated power supply – no connection to the vehicle electrical system required
• Compact design: 47 x 54 x 16 mm, weight: 50 g
• Secure hold thanks to Conec SlideLock system
• SkyDemon-compatible for Android and iOS (from version 4.0.2)

Detailed installation instructions are included and are available available for download online ready.

Note: The adapter is intended for experimental use only.

---

We are pleased to announce another highlight in SD-Link-to be able to present a portfolio:

The new SD-Link Adapter for that uAvionix AV-30 Multi-Function Display (MFD) is here!

This adapter allows navigation data to be used for the autopilot from SkyDemon via Bluetooth Low Energy (BLE) Display directly on an AV-30 MFD – completely without manual input and without complicated wiring. This transforms the AV-30 into a... SkyDemon Synchronous HSI displaying the planned course line, course deviation, name, and distance to the next waypoint.

Advantages at a glance:
✅ Plug-and-play solution for AV-30
✅ Navigation data transmission of the active leg via Bluetooth BLE directly from SkyDemon
✅ Consistent display of the real situation and the planning – simple and precise
✅ Compact design, easy retrofitting
✅ Can be combined with uAvionix AV Link

We are pleased to announce that our SD-Link Adapter now also compatible with navigation software Sky-Map are compatible.

All adapter models are fully supported – now also the adapter for the Becker AR602X.

Further information on setup and configuration can be found here:

Sky-Map News

We are pleased to fill a gap in the SD-Link-portfolio finally closed:

With the SD-TY9X-E There is now a suitable Bluetooth adapter for TRIG TY91 / TY92 radios are available to support you.

The compact adapter is simply inserted between the control panel TC90 and plugged into the existing Sub-D connector – without additional cabling or mechanical changes. Frequencies can be read directly from SkyDemon transmitted via Bluetooth Low Energy (BLE).

Properties at a glance

• Compatible with TRIG™ TY91 and TY92 (from firmware 1.5), connection to the TC90 control unit
• Easy installation through plug-and-play – adapter is inserted into the existing cabling
• No separate power supply required – suitable for 12 V and 24 V avionics systems
• Compact design: 48 x 45 x 17 mm, weight 50 g
• Integrated mini-fuse (125 mA) to protect the electronics
• Parallel use with existing EFIS connection possible

Detailed installation instructions are included and are also available online.

For experimental use only!

We are pleased to present a new version of our proven SD-Link ATR833 Introducing Bluetooth adapters: the angled Version!

Especially when space is limited behind the radio, as is the case with many ATR833In such cases, a space-saving solution is required for installations.
To ensure optimal adaptation to the different radio devices To enable this, we now offer two options:

• SD-ATR833-A-LEFT – The front Sub-D connector widens downwards
• SD-ATR833-A-RIGHT – The front Sub-D connector tapers downwards

Since the orientation depends on Radio model varies, we have a Assignment table created.

The adapter works as usual without additional cabling or mechanical adjustmentsSimply plug it in between the radio and the Sub-D connector – done! Of course, this version is also compatible with... SkyDemon compatible so that standby and active frequencies can be conveniently transmitted via Bluetooth Low Energy (BLE).

Key Features:
✔ Compatible with ATR833-S, ATR833-A and ATR833-II-OLED 
✔ Space-saving design, ideal for tight installation situations
✔ No additional power supply required, supports 12V & 24V avionics bus 
✔ Stable seat thanks to Molex Latch Systems 
✔ V24 data interface for optional extensions (e.g. autopilot, AV-30 displays)
✔ Compact design: 46 x 61 x 17 mm, only 60 g 
✔ Simple installation – no soldering or modifications required

All details about the new adapter can be found here:
🔗 SD-Link ATR833 Bluetooth Adapter – Angled

With this new variant, pilots have even more flexibility in installation – without compromising on stability and functionality!

The Universaladapter SD-GENERIC-E V1.2 is the first SD-Link-product with Bluetooth® 5.0 Low EnergyThe new technology not only enables fast transmission of frequencies to radio devices, but also the stable and uninterrupted transmission of navigation data to autopilots.

Previously, earlier Bluetooth versions could crash because the limited data packet length was not sufficient to fully transmit larger navigation information. With Bluetooth 5.0 this problem is eliminated - thanks to unlimited data packet lengths and an significantly improved signal stability.

The advantages of Bluetooth® 5.0 for SD-Link-Adapter:

• Stable connection without interruptions – no limit on data packet length, ideal for navigation information to autopilots
• Doubled range – reliable communication even in demanding environments
• Higher data rate - up to 2 MBit / s for fast frequency and navigation transmission
• Lower energy consumption – more efficient power management for longer operating times
• More reliable signal transmission – improved immunity to other radio signals

Our other products will follow soon.

Important note: The mechanical dimensions, installation process and handling remain unchanged. The proven SD-LinkQuality remains – now with a more powerful and stable communication technology.